PROBLEM 3.70
A hollow steel drive shaft (G = 11.2 × 106 psi) is 8 ft long and its outer and inner diameters are respectively equal to 2.50 in. and 1.25 in. Knowing that the shaft transmits 200 hp while rotating at 1500 rpm, determine (a) the maximum shearing stress, (b) the angle of twist of the shaft.
You might also like to view...
The flue lining should project _____ above the last course of masonry units laid on the chimney.
A. less than 4 " B. exactly 5" C. approximately 6" D. no less than 8"
List at least two I/O modules that require shielded cable to reduce the effects of electrical noise.
What will be an ideal response?
What is the A dimension of NZ2?
Refer to Drawing Numbers T6592ML R0, T6593ML R0, and T6594ML R0.
Un tubo de subida es _____.
a. una tubería de distribución que pasa verticalmente a través de un mínimo de dos niveles b. un equipo utilizado para levantar materiales c. un catalizador para cemento de terminación d. una pieza de plomería conectada a un cabezal aspersor