____ (JIT) is a CIM technique largely associated with Japanese manufacturing.
A. Japanese Institute of Technology
B. Just-in-time
C. Jig-in-tenon
D. Japanese industrial technology
Answer: B
You might also like to view...
Referring to the figure shown below, a short to ground of circuit A77C would most likely cause fuse F15 to blow.
Answer the following statement true (T) or false (F)
Describe direct seeding and list five factors that determine the success of this method
What will be an ideal response?
Assuming they both have the same condenser temperature, which application requires more horsepower to produce a ton of cooling: a 0°F evaporator, or a 40°F evaporator?
A) The 0°F evaporator, because of the higher pressure difference B) The 40°F evaporator, because of its higher pressure C) The horsepower requirement is too complicated a calculation to make any valid comparison based only on evaporator and condenser temperatures. D) The horsepower requirement per ton of cooling is not affected by the evaporator temperature.
In normal automotive terms, suspension spring compression is called jounce, while the expansion of the suspension spring is called _____.
A. bounce B. rebound C. slippage D. rotation