What term describes the basic shape and size of a vehicle?

A) Wheelbase B) Platform C) Track D) Profile


B

Trades & Technology

You might also like to view...

Three reasons technicians must use a gas detector on their process unit are:

What will be an ideal response?

Trades & Technology

Determine the wiring and conduit needed for the drill presses in Figure 18.5. The conduit is to be run along the ceiling. The ceiling height is 20 feet.

What will be an ideal response?

Trades & Technology

When de-powering a Toyota Camry hybrid or Lexus hybrid, how long should the technician wait before touching any of the high voltage components?

A) No more than 1 minute B) At least 5 minutes C) At least 8 minutes D) None of these is correct

Trades & Technology

A balanced three-phase system has a distribution wire with impedance 2 + j6 ? per phase. The system supplies two three-phase loads that are connected in parallel. The first is a balanced wye-connected load which absorbs 400 kVA at a power factor of 0.8 lagging. The second load is a balanced delta-connected load with impedance of 10 + j8 ? per phase. If the magnitude of the line voltage at the loads is 2400 V (rms), calculate the magnitude of the line voltage at the source and the total complex power supplied to the two loads.

What will be an ideal response?

Trades & Technology