The ____ team is responsible for working with the remainder of the organization to assist in the recovery of nontechnology functions.
A. damage assessment
B. data management
C. logistics
D. business interface
Answer: D
You might also like to view...
Which of the following would you NOT expect to be true at the new steady state (compared to normal operation)?
An ammonia synthesis process normally works as follows: Fresh feed air and hydrogen are combined with a recycle stream and the combined stream is compressed to 10 MPa. The compressed stream enters a reactor, and the entering nitrogen and hydrogen are converted into ammonia until the reaction reaches equilibrium. The reactor effluent, still at 10 MPa, enters a condenser. The liquid and vapor streams leaving the condenser are in VLE. The liquid stream, which is essentially pure ammonia, is the product. A fraction of the vapor stream leaving the condenser is purged, while the rest is recycled. There is a problem with the compressors and the pressures of the reactor and the condenser both drop to 9 MPa. The fresh feed rate and the fraction of vapor leaving the condenser that is purged each remain the same, as do the reactor and condenser temperatures. The system reaches a new steady state at 9 MPa.
Geothermal heat pumps use the ____________________ or ____________________ as a heat source or a heat sink.
Fill in the blank(s) with the appropriate word(s).
Match each item with a statement below.
A. A mixture of lime or gypsum with sand and water that hardens into a smooth solid. B. The amount of recovered material that would otherwise be discarded in the waste stream that is introduced as raw materials in the production process. C. The portion of a product that is reclaimed after consumer use. D. The portion of a product that contains some percentage of manufacturing waste material that has been reclaimed. E. Made of linseed oil, cork and wood particles, and is experiencing a recent resurgence, particularly in green building projects. F. Inexpensive, reasonably durable, and serves as an excellent substrate for paint finishes.
What is the purpose of the rubber spring bumper on the strut piston rod?
What will be an ideal response?