A continuous sheathing wood structure panel (CS-WSP) must _____.
A. not be used to resist any wind load in excess of 100 mph (45 m/s)
B. be attached to the studs using 6d common nails placed at 6" (150 mm) o.c.
C. use 1/4" (6 mm) panels for the wall sheathing
D. be anchored to the foundation with four 1/2" (12.7 mm) Â anchor bolts
Answer: B
You might also like to view...
Is a roof cover board required above insulating concrete or foamed concrete insulation before installing the roof membrane?
What will be an ideal response?
When the insulation requirements call for a greater depth of loose-fill insulation than the height of the ceiling joists in an attic will allow, you can provide containment for the loose-fill insulation by _____.
a. using soffit baffles to hold the excess insulation in place b. tamping down the insulation and holding it in place with plywood sheathing nailed to the ceiling joists c. laying plastic sheeting over the loose-fill insulation to hold it in place d. installing strike-off boards over the joists
For the cash flows shown, find the future worth in (a) year 5, and (b) year 4. Assume an i of 10% per year. (This is Problem 3.25 above.)
What will be an ideal response?
If the lock-to-lock steering wheel rotation is 3.25 turns and the total front wheel movement is 78 degrees the steering ratio is:
What will be an ideal response?