A commonplace use for capacitors in electronics is to:
A) block AC voltages. B) pass both AC and DC voltages.
C) pass DC voltages only. D) block DC voltages.
D
You might also like to view...
Full time four-wheel-drive vehicles use ________.
A) Three differentials B) Spiral bevel drive axles C) A transfer case D) Both A and C
Tip cleaners are _____.
a. strong detergents used to dissolve carbon buildup in torch tips b. small round files used to remove impurities from a torch tip c. solvent tanks and pumps used to force solvent through the tip openings d. high-velocity nozzles used to blow debris from a torch tip
Compared to a water thermal storage system, an ice thermal storage system
A) Is preferable for storing solar heat for later use B) Is smaller for the same storage capacity C) Takes up about the same space, but operates at a lower temperature D) Is larger for the same storage capacity because ice expands when it freezes
What is the time constant in an RC integrating circuit if a 22 k? resistor is in series with a 0.02 ?F capacitor?
A) 0.44 ms B) 0.044 ?s C) 0.44 s D) 0.044 ms