When designing the structural steel support system for a building, where do structural drafters obtain most of their information?
What will be an ideal response?
Structural drafters and designers receive most of their information from architectural drawings.
You might also like to view...
What is a check valve?
What will be an ideal response?
A rural principal arterial is expected to carry an ESAL of 0.188 x 106 during the first year of operation with an expected annual growth of 6% over the 20-year design life. If the subgrade has a resilient modulus of 15,000 lb/in2, design a suitable pavement consisting of a granular subbase with a layer coefficient of 0.13, a granular base layer with a layer coefficient of 0.14, and an asphalt concrete surface with an elastic modulus of 400,000 lb/in2. Assume all mi values = 1, the percent of traffic on the design lane is 47%, and SN = 4. Use a reliability level of 85%, a standard deviation of 0.45, and a design serviceability loss of 2.0.
What will be an ideal response?
The stick-system type of curtain wall is commonly used on buildings of less than _____
a. 15 stories b. 12 stories c. 5 stories d. 3 stories
After diagnosing a defective compressor, the technician should:
A) Rebuild the compressor in the field. B) Determine why the original compressor failed. C) Add refrigerant to improve compressor performance. D) Add hard start kit to improve compressor performance.