In general, how is total load subdivided?
What will be an ideal response?
Total load is subdivided into continuous and noncontinuous loads.
You might also like to view...
Figure 41-02
In the accompanying figure, because control relay CR is used as a(n) ____________________, it must be permitted to remain energized when either or both of the motor starters are not energized.
Fill in the blank(s) with the appropriate word(s).
When testing the starting system on a vehicle with a six-cylinder engine, you find that the engine cranks slowly, the starter current draw is 80 amps, and the battery voltage during cranking is 11.5 volts. What should you do next?
A. check the voltage drop of the starter motor circuit. B. test the battery capacity. C. replace the starter motor. D. check the engine.
Technician A says that all vehicles equipped with ABS will experience a pulsating brake pedal even during normal braking. Technician B says that ABS will result in quicker stops on all road surfaces. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
Technician A says that silicone grease can be used to lubricate the shoe contact ledges. Technician B says that synthetic brake grease, lithium brake grease, or anti-seize compound can be used as a brake lubricant. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician