If a circuit has 12 amps of current and the resistance is 20 ohms, the applied voltage is _____.
a. 120 volts
b. 240 volts
c. 270 volts
d. 380 volts
b. 240 volts
E = I x R
E = 12 x 20 = 240V
You might also like to view...
The direction of ____________________ may be reversed by changing the direction of the current either in the series field or the armature.
Fill in the blank(s) with the appropriate word(s).
The term quarter-sawedmeans _____.
a. only one-fourth of the tree is used b. the lumber is classified as softwood c. the lumber is cut with the growth rings at an angle greater than 45 degrees d. the log is cut into four equal lengths before it is cut into lumber
Technician A says that an AGM battery can be charged with any battery charger. Technician B says that an AGM battery requires a charger specially designed for charging AGM batteries. Who is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
To forward bias and fire a UJT, V
must be increased to exceed the gradient voltage of about 7 volts plus the diode breakover of about 0.7 volts.
Answer the following statement true (T) or false (F)