During an SRAM memory write operation ________
A) the data to be stored is placed on the data bus, the write line is activated, and the address of the memory location is placed on the address bus
B) the data to be stored is placed on the data bus, the address of the memory location is placed on the address bus, and the write line is activated
C) the write line is activated, the address of the memory location is placed on the address bus, and the data to be stored is placed on the data bus
D) the address of the memory location is placed on the address bus, the data to be stored is placed on the data bus, and the write line is activated
D
You might also like to view...
When water freezes, how much does it expand in volume?
A. 2 percent B. 5 percent C. 9 percent D. 18 percent
The ____, as given on the site plan, is the reference point from which all elevations are located.
A. bench mark B. contour line C. building location D. light standard
According to the EJCDC Document E-500, Exhibit A, how many optional additional services that require the owner’s written authorization and how many required additional services not requiring owner’s written authorization are listed?
What will be an ideal response?
Why should the lights be turned on when checking for ripple voltage or AC current from the alternator?
A) To create an electrical load for the alternator B) To warm the battery C) To check that the battery is fully charged D) To test the battery before conducting other tests