What type of pipe connection should be used in a high-pressure, flammable, or corrosive service?
A. Threaded
B. Screwed
C. Bonded
D. Welded
A. Incorrect. If the pipe is used in low-pressure water service, a threaded joint might be appropriate because it is cheaper and easier to install.
B. Incorrect. Threaded (screwed) connections are typically used for low-pressure, nonflammable, and nontoxic service.
C. Incorrect. A bonded pipe can be welded, glued, soldered, or brazed.
D. Correct. If the pipe is to be used in high-pressure, flammable, or corrosive service, a welded joint would be a better option because it is less likely to leak than threaded joints.
You might also like to view...
? Identify and state the historical significance of Jacob S. Coxey.
What will be an ideal response?
The iATN is comprised of a group of thousands of professional automotive technicians from around the world.
Answer the following statement true (T) or false (F)
Well-vegetated buffer strips 10 to 20 meters wide can be expected to reduce the total N content of runoff water by about ________
A) 40% B) 90% C) 10% D) 60% E) 20%
If a hole does not go through the part, the depth must be noted in the circular view, or in section.
Answer the following statement true (T) or false (F)