Give the term, also referred to as systems or assemblies, that are common major components in buildings and perform a known function regardless of the design specification, construction method, or materials used:
What will be an ideal response?
functional elements
You might also like to view...
Which of the following statement about ASME standards is true?
a. ASME was created to develop standards for the crane industry. b. ASME standards have nothing to do with the qualifications of mobile crane operators. c. There are several ASME standards that are relevant to mobile cranes. d. As long as the ASME standards are met, the OSHA standards are irrelevant.
____________________ on heating appliances are basically thermostats that open when an unsafe condition exists in the furnace, such as high furnace temperatures.
Fill in the blank(s) with the appropriate word(s).
PROBLEM 3.29 While the exact distribution of the shearing stresses in a hollow-cylindrical shaft is as shown in Fig. a, an approximate value can be obtained for ?max by assuming that the stresses are uniformly distributed over the area A of the cross section, as shown in Fig. b, and then further assuming that all of the elementary shearing forces act at a distance from O equal to the mean radius of the cross section. This approximate value where T is the applied torque. Determine the ratio of the true value of the maximum shearing stress and its approximate value for values of respectively, equal to 1.00, 0.95, 0.75, 0.50, and 0.
Proper tire inflation pressure specification is found ________
A) On the driver's door or post B) In the owner's manual C) On the sidewall of the tire D) Both A and B