What could happen to an analog meter if too high a voltage is tested?
What will be an ideal response?
If too high a voltage is being tested for the scale setting, then the meter can be damaged.
You might also like to view...
When do the inspectors conduct inspection tests with their test equipment?
What will be an ideal response?
Determine the required slab thickness, according to the AASHTO Alternate Design Method, for a rigid pavement being designed near Jacksonville, Florida, for the following input data:
Estimated future traffic load = 10,000,000 ESALs Design reliability = 95% Overall standard deviation = 0.39 Initial serviceability index = 4.5 Terminal serviceability index = 2.5 Effective subgrade modulus = 250 lb/in2 Mean concrete modulus of rupture = 700 lb/in2 Mean concrete elastic modulus = 4,200,000 lb/in2 Joint spacing = 20 ft Base modulus = 25,000 lb/in2 Base thickness = 6 inches Slab width = 12 ft supported by asphalt concrete shoulders What will be an ideal response?
Significant structural damage over a large area can be expected after windstorms, tornadoes, or hurricanes because:
A. wind loads are considered as part of the structural design. B. of a lack of early warnings from the National Weather Service. C. unpredictable seismic events affect important public and critical infrastructure. D. many buildings were constructed before stringent requirements for wind loads appeared in model building codes.
________ are used as the finish surface on concrete forms in residential and commercial work
A) Panel overlays B) Medium-density fiberboards C) Hardboards D) Veneers