Which of the following terms is used to describe a one-piece piston?
A. crosshead
B. articulating
C. ceramic
D. trunk
Answer: D
You might also like to view...
Air/mist coolant in grinding applications:
A) Excessively limits the visibility of the operator B) Is of limited value and only can be used in a few situations C) Require extensive supply and return lines D) Requires adequate ventilation of the work area
What would be the required vacuum for an oil furnace located 5 feet above the oil tank with a horizontal run of 20 feet?
What will be an ideal response?
Define casing.
What will be an ideal response?
A corner office measures 10 feet by 12 feet 6 inches with an 10-foot ceiling. The two outside walls are brick with 3 1/2 inches of insulation. There are no windows in the walls. The ceiling has 9 1/2 inches of insulation beneath a vented roof. The floor is a slab floor sitting on the ground. What is the heat load for the ceiling for a design temperature difference of 75°F?
Fill in the blank(s) with the appropriate word(s).