A vehicle was towed into the service facility. The customer tells the service consultant that the brakes are broken. More questions reveal that the brake pedal goes to the floor, fluid was all over the ground, and they don’t seem to work. What is the best way to write this problem on the repair order?

A. Inspect brakes
B. Customer claims: BRAKES DO NOT WORK - see service consultant
C. Customer claims there is a brake problem
D. Road test vehicle and confirm brake problem


C. Customer claims there is a brake problem

Trades & Technology

You might also like to view...

Technician A says that most fuel injection systems use the PCM to control the pulsing of the fuel injectors. Technician B says that most fuel injection systems use the PCM to control the operation of the fuel pump control module. Which technician is correct?

A) Technician A only
B) Technician B only
C) Both technicians
D) Neither technician

Trades & Technology

A certain store contains three balanced three-phase loads. The three loads are:

Load 1: 16 kVA at 0.85 pf lagging Load 2: 12 kVA at 0.6 pf lagging Load 3: 8 kW at unity pf. The line voltage at the load is 208 V rms at 60 Hz, and the line impedance is (0.4 + j0.8) ?. Determine the line current and the complex power delivered to the loads.

Trades & Technology

An air conditioner using refrigerant R-134a has a low-side pressure of 35 psig and a temperature of 40°F. According to the pressure-temperature chart:

A) It is saturated. B) It is superheated. C) It is subcooled. D) Its condition cannot be determined knowing just the pressure and temperature.

Trades & Technology

A 24 ft. x 37 ft. single story house with a basement has the heating unit in one end of the basement. What type of supply duct system would be used in this application?

What will be an ideal response?

Trades & Technology