What is the correlation between the shape of a part and the resistance it offers to bending?
What will be an ideal response?
The given shape or the configuration of a panel has a direct bearing on the strength it has. A sharply crowned surface offers more resistance to bending than one with a gradual or less dramatic crown and also is considerably more resistant to bending or distortion than one that is relatively flat.
You might also like to view...
?Using the ______ method,the construction manager may act purely as an advisor, providing guidance and expertise throughout the design and construction of a project, and does not guarantee a budget or schedule.
A. Construction Management for Fee B. Design-Build C. Construction Management at Risk D. Integrated Design Process
Answer the following statements true (T) or false (F)
3D fillets can be created with the same command as 2D fillets.
LD50 is a measure of:
a. dispersion c. activity b. toxicity d. suspension
During an AC performance test, an R-134a air conditioning system has a measured center duct outlet temperature of 59 degrees F. A manifold gage set shows low side pressure ranges between 35-45 psi and the high side pressure ranges from 250-400psi. Shop Temperature is 72 degrees F. What is most likely the cause?
a. The system has insufficient charge and may be leaking b. The system contains air with the refrigerant c. The TXV is restricted and not allowing enough refrigerant to flow d. The compressor is defective