List the three conditions that apply where parallelism is applied to a diameter at RFS.
What will be an ideal response?
ANS:
Where parallelism is applied to a diameter at RFS, the following conditions apply:
1. A diameter symbol may be used in the feature control frame to indicate that the tolerance zone is the space within a cylinder.
2. The tolerance zone is parallel to the primary datum plane.
3. The axis of the unrelated actual mating envelope must be located within the tolerance zone.
You might also like to view...
The ____________________ moves according to the position of the throttle.
Fill in the blank(s) with the appropriate word(s).
Find the exponential Fourier series for the waveform in Fig. 17.53.
 figure 1.png)
95/5 solder should be used ____.
A. on the high side of the system B. on the low side of the system C. when there are extreme changes in pressures and temperatures D. always
Which of the following MOST accurately lists the advantages of MOS ICs over TTL ICs?
A) Occupy less space, require fewer external connections, are unipolar devices, and normally do not use IC resistor elements B) Occupy less space, operate faster, and are easier to fabricate C) Occupy less space, operate faster, are less expensive to manufacture, and consume less power D) Occupy more space, are less expensive to manufacture, are bipolar devices, and normally do not use IC resistor elements