All of the following statements are true EXCEPT:

A. the side bearings on the differential case are adjusted to a specified preload.
B. if the bearing clearance is too tight, they can fail.
C. a good indication of preload is that your little finger should strain when trying to turn the ring gear.
D. on a Salisbury axle, preload and backlash adjustments are made with hubs.


Answer: D

Trades & Technology

You might also like to view...

Why should a joint sealant have adhesion only to the two opposite surfaces of a joint? Explain.

What will be an ideal response?

Trades & Technology

A truck diesel engine rated speed governed at 2000 rpm has a droop curve of 10%. What should be the high idle speed?

A. 2000 rpm B. 200 rpm C. 1800 rpm D. 2200 rpm

Trades & Technology

WaterSense certification is available for faucets that deliver a maximum of ____ GPM.

A. 1.5 B. 8.0 C. 21.5 D. 30.5

Trades & Technology

What is the purpose of purging with nitrogen while brazing?

A) To help the flame burn a little hotter B) To prevent oxide formation inside the pipes C) To check for leaks at the same time you are brazing D) To blow the oxides off of the walls before it has a chance to firmly adhere

Trades & Technology