Each dimension shall have a ____, except for those dimensions specifically identified as reference, maximum, minimum, or stock (commercial stock size).
A. tolerance
B. template
C. characteristic
D. scale
Answer: A
You might also like to view...
List several signs that would indicate an ill chicken
What will be an ideal response?
Splices in wire-type grounding electrode conductors are acceptable only if by means of irreversible compression-type connectors (listed as grounding and bonding equipment) or by the ____.
A. endothermic welding process B. exothermic welding process C. cold fusion D. hot spark technique
On Prius models equipped with a Smart key system, how far should the ignition key be kept away from the vehicle during service to prevent accidental starting?
A) 10 feet B) 100 yards C) 15 feet D) 2 feet
Hard-drawn copper tubing is harder than soft tubing because _____
a. it has been annealed b. it has other metals combined with the copper c. of the drawing process used to manufacture it d. it has been through a special tempering process after forming