When backing your vehicle, which of the following is NOT recommended.
A. Back as slow as possible
B. Back towards the right side
C. Use the lowest reverse gear
D. Back and turn towards the driver's side Back towards the right side.
B. Back towards the right side (When backing your vehicle you should always back and turn towards the driver's side, even if it means going around the block to put your vehicle in the right position. Backing towards the right side is very dangerous because you can not see well.)
You might also like to view...
The National Electric Code (NEC)® tables list the amount of current that the motor is expected to draw under a full load condition.
Answer the following statement true (T) or false (F)
Instruments are installed on vessels to monitor and/or control the _____.
a. level and temperature b. temperature and direction c. level and weight d. process control
The ____________________ could have prevented 50 percent of all shop accidents.
Fill in the blank(s) with the appropriate word(s).
When soldering 1-1/2" tubing in a horizontal position, you should _____
a. feed the solder from a single point b. start feeding solder at the top and work down c. start feeding solder near the bottom and work up d. turn the assembly to the vertical position first