Items made of pressed plastic should be avoided in the outdoor room because they are lightweight and likely to fall over and blow away
Indicate whether the statement is true or false
T
You might also like to view...
Problem 1.48 For the support of Prob. 1.47, knowing that the diameter of the pin is d = 16 mm and that the magnitude of the load is P = 20 kN, determine (a) the factor of safety for the pin, (b) the required values of b and c if the factor of safety for the wooden member is the same as that found in part a for the pin. Problem 1.47 A load P is supported as shown by a steel pin that has been inserted in a short wooden member hanging from the ceiling. The ultimate strength of the wood used is 60 MPa in tension and 7.5 MPa in shear, while the ultimate strength of the steel is 145 MPa in shear. Knowing that b = 40 mm, c = 55 mm, and d = 12 mm, determine the load P if an overall factor of safety of 3.2 is desired.
Computer control modules use memories that require battery voltage to be maintained and will ____ if the battery is disconnected.
A. reset B. short out C. remain D. repair themselves
FWD driveshaft problems are usually indicated by ________
A) Noise B) Grease from a torn boot C) Both A and B D) Neither A nor B
How many different numbers can be represented using eight bits?
A) 256 B) 128 C) 64 D) 512 E) none of the above