An AWD transfer case may also include a ________.
A) Shifter for the front output shaft
B) Low-range gear set
C) Differential
D) All of these
C) Differential
You might also like to view...
Problem 1.62 Two brass rods AB and BC, each of uniform diameter, will be brazed together at B to form a non-uniform rod of total length 100 m that will be suspended from a support at A as shown. Knowing that the density of brass is 8470 kg/m3, determine (a) the length of rod AB for which the maximum normal stress in ABC is minimum, (b) the corresponding value of the maximum normal stress.
What kind of damage do high compression ratios cause?
a. Slugging b. Flooding c. Starving d. Overheating
Temperature difference does not affect heat transfer rate.
Answer the following statement true (T) or false (F)
Assume that the coupling between the motor and the inertial load of Problem 19.25 is flexible (e.g., a long shaft). This can be modeled by adding a torsional spring between the motor inertia and the load inertia. Now we can no longer lump together the two inertias and damping coefficients as if they were one; we need to write separate equations for the two inertias. In total, there will be three equations in this system: the motor electrical equation, the motor mechanical equation (Jm and Bm), and the load mechanical equation (J and B)
a. Sketch a diagram of the system. b. Use free-body diagrams to write each of the two mechanical equations. Set up the equations in matrix form. c. Compute the transfer function from input voltage to load speed, using the method of determinants.