A professional driver should expect a train to come through a highway-rail grade crossing _____.
Fill in the blank(s) with the appropriate word(s).
at any time
You might also like to view...
If you add shims to a longitudinal torque rod attached to the forward drive axle carrier in a tandem drive truck, which of the following will result?
A. only the working angles of the U-joints in the front driveshaft will change B. only the working angles of the U-joints in the rear driveshaft will change C. the working angles of the U-joints in both driveshafts will change D. no U-joint working angles will be affected
Technician A says that some crankcase vent systems use a calibrated orifice instead of a PCV valve. Technician B says that turbocharged engines often use an oil/water separator in the PCV system. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
Many factory installed superchargers are equipped with a ________ that allows intake air to flow directly into the intake manifold bypassing the supercharger
A) Control valve B) Throttle control valve C) Wastegate D) Bypass valve
When are seals without garter springs used?
What will be an ideal response?