All of the following statements are true EXCEPT:
A. shifts can be either too late, with the engine rpm too high, or too early, with the engine lugging.
B. a transmission that shifts at the wrong time could be the result of a pressure problem or a sticking valve in the valve body.
C. pressure problems can be caused by a leaking modulator, a misadjusted throttle valve cable, or a sticking governor.
D. clutch chatter can be caused by a leaking modulator, a misadjusted throttle valve cable, or a sticking governor.
Answer: D
You might also like to view...
What is the title of the drawing?
Review drawing number 523708C0A and then answer the question.
How do hydronic heating systems circulate water throughout a structure?
What will be an ideal response?
There are two causes of increased resistance at cable connections: ____________________ and air.
Fill in the blank(s) with the appropriate word(s).
Two technicians are discussing how to loosen bleeder valves. Technician A says that a shock is usually necessary to break the taper at the base of the valve. Technician B says to apply steady, loosening torque to the bleeder valve using a 6-point wrench. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician