When checking alignment angles, what should the technician look for?
A) The camber on the left and right should be within 0.5 degree of each other
B) All angles within factory specifications
C) The castor on the left and right should be within 0.5 degree of each other
D) All of the above
D
You might also like to view...
An asphalt paving crew is used to pave a road 8,000 feet long. The road is 48 feet wide and the paving machine can pave a 12-foot-wide strip of road during each pass. The machine paves 13 lineal feet of 12-foot-wide road per minute. Two lifts of asphalt are needed to pave the road. After completing a pass, it takes the crew 15 minutes to turn the paving machine around and get ready for the next
pass. The crew consists of a foreperson, seven operators, and a laborer. Using a system efficiency of 45 minutes per hour, determine the number of labor hours required to place 1 lineal foot of road 12 feet wide. What will be an ideal response?
Sealing compound shall ____.
A. have a melting point of 93° F or higher B. cement sections of conduit together C. not be affected by surrounding atmosphere or liquids D. provide a seal against the passage of sparks
Norman Bel Geddes popularized _____, the aerodynamically efficient design style created through scientific research.
Fill in the blank(s) with the appropriate word(s).
Find the number of watts in the armature of a generator having an internal resistance of 0.3 ohm and a voltage of 6 volts across the resistance.
Fill in the blank(s) with the appropriate word(s).