If the chromium-nickel content of a stainless steel is referred to as 25-12, then it contains ____.
A. 25 percent nickel and 12 percent chromium
B. 75 percent chromium and 8 percent nickel
C. 25 percent chromium and 12 percent nickel
D. 75 percent nickel and 8 percent chromium
Answer: C
You might also like to view...
Which of the following is NOT a problem associated with workers' compensation?
A) Benefits to injured personnel are out of control B) It has not achieved its intended objectives C) There is evidence of abuse D) It has not succeeded in removing litigation from the process
The data shown in Table 2.20 were collected for ozone levels in the Los Angeles, CA air basin. Plot the data recorder below in Excel in ppm and µg/m3. Identify the years LA was not in compliance with the NAAQS standards.
What will be an ideal response?
As clutch friction facings wear on a truck pull-type clutch, how is clutch pedal free travel affected?
A. decreases B. increases C. unaffected
An alternate removed section ____.
A. needs to be properly labeled with the cutting plane label B. should be shown at the same scale as the part from which it came C. can be rotated around its own centerline and shown on the centerline outside the part D. both a and c E. none of the above