Lapping is the process of using a grinding paste to produce a fine finish on the teeth of the two gears that will be in full contact with each other
Answer the following statement true (T) or false (F)
True
You might also like to view...
Which of the following statements about the use of turnbuckles is correct?
a. Hook-and-hook turnbuckles are preferred over eye-and-eye turnbuckles for rigging. b. Turnbuckles are used to adjust the length of rigging connections. c. Turnbuckles are best tightened with a pipe wrench at least 24" (61 cm) in length. d. When using multi-legged slings or hitches, two turnbuckles should be used on each leg.
Technician A says that the ignition timing cannot be adjusted on waste spark ignition systems. Technician B says that most waste spark systems use a crankshaft position sensor. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
A brake pedal assembly has a 9-inch lever and the master cylinder pushrod is 1.5 inches from the fulcrum. If the driver applies 50 pounds of force to the pedal, how much force will be applied to the master cylinder?
A. 150 pounds B. 250 pounds C. 300 pounds D. 350 pounds
What type of fire extinguisher is usable for most types of fires?
A) CO2 B) CO C) Dry chemical D) Water