When estimating an object that has a(n) ____________________ shape, it may be difficult to obtain the exact measurements, and the weight estimation should be based on the largest dimensions that can be obtained.
Fill in the blank(s) with the appropriate word(s).
irregular
You might also like to view...
A knee in a leakage current-versus-voltage plot indicates a _____.
a. breakdown current b. charging current c. leakage current d. corona curren
You had 17.2 acres of alfalfa hay to be cut at a cost of $375.80 to have the hay cut. What was the cost per acre?
What will be an ideal response?
For the past 80 years, wildlife managers have been doing an outstanding job; most areas have now reached their _____
a. carrying capacity b. bag limits c. full potential d. biological surplus
A two-lane highway bridge, supported on two deck trusses that span 64 ft, consists of an 8-in. reinforced concrete slab supported on four steel stringers. The slab is protected by a 2-in. wearing surface of asphalt. The 16-ft-long stringers frame into the floor beams, which in turn transfer the live and dead loads to the panel points of each truss. The truss, bolted to the left abutment at point A, may be treated as pin supported. The right end of the truss rests on an elastomeric pad at G. The elastomeric pad, which permits only horizontal displacement of the joint, can be treated as a roller. The loads shown represent the total dead and live loads. The 18-kip load is an additional live load that represents a heavy wheel load. Determine the force in the lower chord between panel points I
and J, the force in member JB, and the reaction applied to the abutment at support A.