____________________ clamps are designed so that they will not cut into a hose.
Fill in the blank(s) with the appropriate word(s).
Rolled edge
You might also like to view...
What does ASCE stand for?
a. American Society of Civil Engineers b. American Society of Chemical Engineers c. Association of Service Coordinating Engineers d. All-State Corps of Engineers
The surface finish for the cylinder walls usually depends on ________
A) The cylinder wall-to-piston clearance B) The type of engine oil that is going to be used in the engine C) The type of piston rings to be used D) Both B and C
The two most common types of couplings are ___________________ and flexible.
Fill in the blank(s) with the appropriate word(s).
Leaks in industrial process cooling systems must be repaired if they have an annual leak rate of:
A) 25% of the charge per year. B) 35% of the charge per year. C) 15% of the charge per year. D) 10% of the charge per year.