Which of the following is an NEC® requirement for grounding and bonding?
a. The path to ground from circuits, equipment, and metal enclosures shall be continuous.
b. The path to ground from circuits, equipment, and metal enclosures shall have sufficiently
high impedance to facilitate the operation of protective devices.
c. The path to ground from circuits, equipment, and metal enclosures shall rely on the earth
as an effective ground fault current path.
d. The path to ground from circuits, equipment, and metal enclosures shall be capable of
safely carrying twice the maximum current of the system.
a. The path to ground from circuits, equipment, and metal enclosures shall be continuous.
You might also like to view...
What may be caused by burner wear? (Select all that apply.)
a. Uneven flame b. Flame impingement c. Hot spots d. Loss of boiler feedwater flow
Capacitors may be considered as ____________________ of magnetizing VARs.
Fill in the blank(s) with the appropriate word(s).
The formula Q = VA indicates that volumetric flow can be determined if two variables are known. A represents ____________________ (accuracy, area), and V represents ____________________ (volume, velocity).
Fill in the blank(s) with the appropriate word(s).
Technician A says Schrader-type valves on refrigerant system service fittings self-seal when the manifold hoses are removed. Technician B says HFC-134a manifold hoses use quick disconnect couplers for attaching to the refrigerant system service fittings. Who is correct?
A. Technician A only B. Technician B only C. Both A and B D. Neither A nor B