All safety glasses should meet standards set by _________
A) DOT B) SAE C) ANSI D) ASE
C
You might also like to view...
The KIA Optima Hybrid uses a ____________driven starter-generator to help slow the vehicle during deceleration.
A. belt B. gear C. vacuum D. hydraulically
Typical TP sensor voltage at idle is about ________
A) 2.50 to 2.80 volts B) 1.5 to 2.8 volts C) 0.5 volt or 10% of WOT TP sensor voltage D) 13.5 to 15.0 volts
To insure that the rafters or joists do not interfere with installation of the plenums on a curb mounted rooftop unit
A) The roof curb must be installed diagonal to the roof joists or rafters B) The roof curb must be square with the roof joists or rafters C) The roof joists or rafters are cut out where the curb is installed D) The plenums are fabricated in place with the roof joists or rafters passing through them
What is the nominal torque rating of an AutoShift transmission with a RTAO-14710B-AS serial number?
A. 1450 lb-ft B. 147 lb-ft C. 710 lb-ft D. 4710 lb-ft