What level of tach reference information is required in order for the PCM to properly control a "Waste Spark" ignition system?
A. Level one information indicating that "a pair of cylinders`pistons is approaching TDC"
B. Level two information indicating "which pair of cylinders`pistons is approaching TDC"
C. Level three information indicating "which cylinder of the piston pair approaching TDC is on the compression stroke"
D. None of this information is required in order for the PCM to control a "Waste Spark" system
Answer: B
You might also like to view...
Per 29 CFR 1926.1410(d), a dedicated spotter used during crane operations near power lines must be _____.
a. able to communicate directly with the crane operator b. a qualified crane operator c. a qualified rigger d. provided with a verbal mode of communication
Use household soaps and detergents to clean dairy equipment
Indicate whether the statement is true or false.
Forging to join metals uses:
A) Additional filler metals B) Electric resistance C) Heat and pressure D) All of the above
The ________ instruction is useful for troubleshooting timer ladder logic
A) Progressive debug B) Temporary end C) Program halt D) One Shot E) There are no specific instructions for this purpose