To reset a tripped circuit breaker, the technician should:

A) First turn the breaker off, and then back on.
B) Use a wireless breaker tool to reboot the breaker.
C) Move the breaker switch to the on position.
D) Reinstall the breaker in the electric panel.


A

Trades & Technology

You might also like to view...

Information on prints that cannot be represented graphically by lines may be presented by:

a. lettered dimensions b. notes c. titles d. all of the above

Trades & Technology

The voltage drop across the parallel resistors shown in Figure 1 is _____.


a. 17.3 volts
b. 20.7 volts
c. 62.1 volts
d. 100 volts

Trades & Technology

To establish a straight reference line for installing the first course of siding, you should measure _____.

a. at four points on each side of the building b. down from the eaves c. up from the ground d. along the top of the foundation

Trades & Technology

When a truck ABS system is described as 6S/4M configured, how many modulator valves are used in the system?

A. 6 B. 4 C. 2 D. 1

Trades & Technology