The term MOST-Likely used to describe a loss of voltage caused when current flows through a resistance is:
A. impedance
B. voltage drop
C. probe
D. short circuit
Answer: B
You might also like to view...
The seam-weld symbol may only have an arrow side significance.
Answer the following statement true (T) or false (F)
Follow the steps of the Systematic Approach of Section 14.4—that is, (1) identify the system, (2) determine whether the process is batch or rate, (3) construct a schematic diagram with inputs and outputs, (4) Label known material quantities or rates of flow and so on. Two liquids, A and B, are mixed together. A is 3.0 percent solids, the remainder water. B is 8.0 percent solids, the remainder water. An amount S of pure, dry solids is mixed with A and B to form 2.0(102) kg of a mixture with 5.0 percent solids. Develop a table of combinations of amounts of A, B, and S that will satisfy the final mixture requirements. What is the maximum amount of B that can be used to meet the requirements without having to remove pure, dry solids from the mixture? Hint: Write a short computer program
or use a spreadsheet and start with B = 0 and increase in increments of 2 kg. What will be an ideal response?
Which of the following statements is LEAST Likely true?
A. More frequent oil changes are required with diesels. B. Under a heavy load, a diesel makes soot, which is abrasive and is hard on engine parts. C. While heavy trucks have transmissions with many gears and are designed to pull heavy loads, passenger cars have only the normal number of gear ranges. D. Diesels generally have a smaller capacity oil pan.
Open end and box end wrenches are offset how many degrees for clearance?
A) 45 degrees B) 90 degrees C) 0 degrees D) 15 degrees