The term ____ is the term most often used in the welding industry when referring to the arc plasma used in welding and cutting processes.

A. plasma arc
B. arc plasma
C. plasma welding
D. plasma cutting


Answer: A

Trades & Technology

You might also like to view...

This is the amount of extra material needed for a bend to compensate for the compression during the bending process.

a. bend allowance b. seam c. hem d. bend relief

Trades & Technology

If a TEV system is overcharged to a 40° condenser split the symptoms will be __________.

a. higher head pressure and higher subcooling b. higher head pressure and lower subcooling c. higher suction pressure and higher superheat d. sweating on the compressor

Trades & Technology

What is the third step of the diagnosis process?

A) Retrieve the diagnostic trouble codes B) Verify the problem C) Look at scan tool data D) Check for technical service bulletins

Trades & Technology

The products of complete combustion of a hydrocarbon gas are:

A) Water, carbon, carbon dioxide, and carbon monoxide. B) Carbon, carbon dioxide, and carbon monoxide. C) Water and carbon dioxide. D) Carbon dioxide and carbon monoxide.

Trades & Technology