On a 25 division inch vernier height gage, the vernier is coincident at the 17th line. If the beam scale reads 3.75, the total reading would be:
A) 3.733 B) 3.766 C) 3.7517 D) 3.767
D
You might also like to view...
A planer is generally set to remove no more than _____.
a. 1/32" (0.8 mm) of material in a single pass b. 1/8" (3 mm) of material in a single pass c. 1/4" (6.4 mm) of material in a single pass d. 1/2" (13 mm) of material in a single pass
An engine equipped with a distributor-type ignition system has the firing order located where?
A) On the spark plugs B) On the engine block C) On the ignition coil D) On the intake manifold
When a general duty split-phase motor reaches approximately 75% of its operating speed, the start winding is de-energized by a ____.
A. circuit board B. capacitor C. centrifugal switch D. dual voltage switch
These thin solid extension lines are used to connect between noncylindrical features, parts, and subassemblies in an exploded assembly.
a. phantom lines b. centerlines c. trails d. sight lines