What points should you bear in mind when mixing basecoat color?
What will be an ideal response?
There are four important points to remember when mixing basecoat color:
| 1. | Always read the directions first. |
| 2. | Use only the manufacturer's recommended hardeners and reducers (or basecoat stabilizer instead of plain reducer, if recommended). |
| 3. | Use the proper reducer or stabilizer temperature for the shop conditions and size of the job. |
| 4. | Use only the proper mixing ratios. |
You might also like to view...
PROBLEM 3.162 The shaft AB is made of a material that is elastoplastic with and G ? 4 ? 106 psi. For the loading shown, determine (a) the radius of the elastic core of the shaft, (b) the angle of twist of the shaft.
Which type of space heater is most likely to not pass a local inspection?
A) gravity operated B) vented C) unvented D) catalytic
In the circuit shown below,
(a) Find Ra = R7 || R8.
(b) Find Rb = R6 + Ra.
(c) Find Rc = R5 || Rb.
(d) Find Rd = R2 || R3.
(e) Redraw the circuit consisting of Vs, R1, Rd, R4, and Rc. Find the equivalent resistance Req
seen from the voltage source.
(f) Find the current I1 through R1, Rd, R4, and Rc.
(g) Find the voltage across R1, voltage across Rd, voltage across R4, and voltage across Rc.
(h) Find the voltage V1, voltage V2, and voltage V3.
(i) Find the currents I5 and I6.
(j) Find the voltage V4, and currents I7 and I8.
Explain modular design with an example.
What will be an ideal response?