A ball bearing that is on a shaft or in a housing should be removed:
A) By applying pressure only to the race that is supported securely
B) Only by pressing on the inner race when the outer race is in a housing or by pushing on the outer race when the inner race is on a shaft
C) By pressing on and supporting any part of the bearing that is available
D) B and C above
A
You might also like to view...
What conditions are necessary for successful grafting?
What will be an ideal response?
____ are especially popular where the structural members used to span and support the building are to be exposed and must have a pleasing appearance.
A. Composite arches B. Decorative posts and spiral beams C. Bonded arches and steel reinforced beams D. Laminated arches
What is a "CPA"?
A) Cold pack adapter B) Connector position assurance C) Caliper pad adjuster D) Caller placement adapter
Which one of the following statements is TRUE?
A) For minimum measurement error, voltmeters should have low internal resistance and ammeters should have low internal resistance. B) For minimum measurement error, voltmeters should have high internal resistance and ammeters should have low internal resistance. C) For minimum measurement error, voltmeters should have low internal resistance and ammeters should have high internal resistance. D) For minimum measurement error, voltmeters should have high internal resistance and ammeters should have high internal resistance.