When delegating, the crew leader should make sure the crew member understands what to do and _____.
a. the degree of risk involved
b. has read the OSHA regulations
c. who should be blamed if there is a problem
d. their level of responsibility
d. their level of responsibility
You might also like to view...
Letter N measures what distance on the tape?
Reduce all fractions to their simplest forms. Convert all improper fractions to mixed numbers. Provide answers in the following format:
Fraction: 3/4
Mixed number: 1 5/8
Answer the following statement(s) true (T) or false (F)
1. Rectifiers can be divided into two basic types, single phase and three phase. 2. There are two types of single-phase full-wave rectifiers: the two-diode type and the bridge type. 3. Bridge type rectifiers require the use of two diodes instead of four. 4. The bridge type rectifier requires the use of a center-tapped transformer. 5. The average DC voltage for the bridge rectifier can be computed in the same manner as the two-diode type full-wave rectifier.
Follow the steps of the Systematic Approach of Section 14.4—that is, (1) identify the system, (2) determine whether the process is batch or rate, (3) construct a schematic diagram with inputs and outputs, (4) Label known material quantities or rates of flow and so on. A road construction firm has a leftover mix of stones from a previous job. The mix consists of 37.5 percent of stones (by mass) between 16 and 25 mm in diameter and 26.8 percent between 10 and 15 mm with the remainder under 10 mm. A new mix is needed that does not require any stones less than 10 mm. These will be screened out and stones between 16 and 25 mm added such that the final mixture contains 74.6 percent of the largest size and has a mass of 46.8 t. How much of the first mix is needed?
What will be an ideal response?
Answer the following statements true (T) or false (F)
Objects can be scaled from different base points with different results