If you were measuring a machine's toe angle you would:
a. Measure the lean the steering wheels have
b. Measure the difference between the steering wheels at their inside edges and level with the wheel spindle
c. Measure the tilt of the kingpin
d. Measure the pitman arm angle at full turn
B
You might also like to view...
When acetylene gas is combined with oxygen during oxyfuel cutting activities, the acetylene causes the flame to burn hotter than _____ degrees Fahrenheit.
a. 2,500 b. 3,500 c. 4,500 d. 5,500
Ladders used to provide access to deck-forming levels must extend above the formwork at least _____.
a. 1 foot b. 2 feet c. 3 feet d. 4 feet
Leadership may be defined as the capacity or ability to solve problems and to set a direction
Indicate whether the statement is true or false
To make lane changes safely, you should do all of the following EXCEPT:
A. leave plenty of space between your rig and other vehicles B. wait a little longer before pulling in front of a vehicle you have passed C. on a multilane road, return to the right-hand lane as soon as possible D. do not always trust the signals of other drivers