A cylindrical object with a constant shape has a 28 cm hole drilled in it from one end of the object to within 10 cm of the other end. Another smaller hole is drilled in the object from the side of the object at a 45° angle through to the drilled hole in the middle of the object. The smaller hole intersects the center drilled hole at 4 cm from the bottom of the center drilled hole. Choose the best option for this object shown on a print from the following suggestions.
A. A revolved section broken away so the section can be dimensioned and section lines put in.
B. An auxiliary section projected directly from the view of the cutting plane line.
C. A broken out section with a small break line to clarify the interior dimensions.
D. A conventional revolution so that the object will not be distorted by foreshortening.
E. A revolved section broken away so the section can be dimensioned.
Answer: C
You might also like to view...
Why is it important to record all pertinent evidence relating to an accident immediately after the accident has occurred?
What will be an ideal response?
Air brake stop lamp switches are typically normally-closed mechanically-actuated switches that detect the movement of the foot valve.
Answer the following statement true (T) or false (F)
The standard ASME Y14.31-2008, Undimensioned Drawings provides the requirements for undimensioned drawings that graphically define objects with true geometry views and predominantly without dimensions. This standard also provides recommendations for drawing and noting bend lines and bend information.
Answer the following statement true (T) or false (F)
Livestock feeds that contain 20 percent or more protein are called ____________________
Fill in the blank(s) with the appropriate word(s).