A passive-type wheel speed sensor (WSS) is being checked for the proper resistance which should be 800—2,500 ohms. The meter reads 1.1 K? . This means ________

A) The sensor has a normal resistance reading B) The sensor is electrically open
C) The sensor is grounded D) The sensor is electrically shorted


A

Trades & Technology

You might also like to view...

In recent years, the timber industry has moved toward being an ______________________ enterprise

Fill in the blank(s) with correct word

Trades & Technology

CINESA, a government-owned power company that normally uses natural gas for electricity generation, is purchasing fuels other than natu­ral gas and power from a commercially built wind farm, often at extra costs, which are trans­ferred to the customer. Total monthly fuel and wind-power costs are now averaging $6,800,000. An engineer with the utility has calculated the average revenue for the past 24 months using three fuel-mix and wind-power situations: all gas, < 30% other or wind, and ? 30% other or wind. The table below shows the number of months for each situation and the associated rev­enue. If the same situation persists for the next 2 years, determine whether the utility’s revenue will be greater or less than the costs and by how much.

Trades & Technology

Many consumer concerns about the wholesomeness and safety of food centers on which of the following industries?

a. Processed foods c. Vegetables b. Animals d. Fruits

Trades & Technology

Analyze and describe how SAE bolt grading can be recognized by a technician.

What will be an ideal response?

Trades & Technology