Backwrapping in an EIFS-clad wall refers to _________.
A) wrapping the joints between EIFS insulation with a water-resistant tape.
B) wrapping the edges of the openings in the wall with a water-resistant tape.
C) wrapping the joints between EIFS insulation with EIFS mesh.
D) wrapping the terminal edges of EIFS insulation with EIFS mesh.
D) wrapping the terminal edges of EIFS insulation with EIFS mesh.
You might also like to view...
What three types of drawing are usually required to provide all of the design information needed to lay out a civil engineering project?
What will be an ideal response?
The slope control affects:
A) The pinch effect B) Number of short-circuits per second C) Shape of the wave D) None of the above
Conventional alignment is also called ________ alignment
A) center line B) collinear C) rim-and-face D) horizontal
A self-metering faucet
A. is spring-loaded to close immediately after the release of the handle B. closes a short time after the handle is released C. uses laser technology D. uses a cartridge and O-rings to control water flow