On drawings that have very small symbols, labeling may need to be applied as ____________________
Fill in the blank(s) with correct word
coding
You might also like to view...
The transmission in a fuel cell vehicle is similar to a HEV transmission
Indicate whether the statement is true or false
Which of the following is TRUE regarding asynchronous counters?
A) less circuitry required than synchronous counters B) J and K inputs are permanently high on LSB flip-flop C) J and K inputs must be decoded on the LSB D) propagation delay is increased
In mountain driving you will have to use a lower gear to drive safely on a grade. Which of these does NOT affect your choice of gear?
a. The length of the grade. b. Tire thread's depth. c. The weight of the load.
Program the hole locations of the part drawing in the accompanying figure. The location dimensions given in the table are taken from drawings before programming for CNC. The origin (0, 0) used for programming is shown on the drawing. Use the hole location dimensions in the table to write program hole locations. Write the program hole locations (coordinates) in table form using a) absolute positioning and b) incremental positioning What will be an ideal response?