Why does Deming say that most of the quality problems are in the system?
What will be an ideal response?
The performance or quality of any component is based on its contribution to the aim of the system and not for its individual production or profit. Within the system all the components work together to, as supported by upper management, attain the aim of the system. Without the aim there is no system. In order to improve a system the inner components have to be evaluated as they relate to the aim of the system. For this reason most of the quality problems are in the system.
You might also like to view...
Technician A says that a supercharger will produce less boost at high elevations than at sea level. Technician B says that a supercharger will produce the same boost at high elevations as it does at sea level. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
When a component is used to perform the function of stop in a control circuit, it will generally be a normally ____ component and be connected in ____ with the motor starter coil.
A. open; series B. open; parallel C. closed; series D. closed; parallel
What is the length of the line?
A line dimensioned at 2-3/16?? is shown on a drawing with a scale of 3:1.
Determine the yearly infiltration rate to the groundwater table in MGD, based upon the above information.
The average yearly precipitation in the Shenandoah Valley watershed is 36 inches. The average rate of evapotranspiration is 28 inches. Typical runoff through the Shenandoah River is 163 
(cfs). Reservoirs within the watershed store 28 million gallons of water. The area of the watershed is 7.5 x 
. Currently, consumptive use of water is 7 million gallons per day (MGD). There are 7.48 gallons per cubic foot.
What will be an ideal response?