A clearance fit of 0.0125 inches is needed between a shaft and a bushing to work properly. The inside diameter (ID) of the bushing measures 1.487 inches. What must be the measure of the outside diameter (OD) of the shaft in inches to obtain this clearance?
What will be an ideal response?
1.4745 inches
You might also like to view...
Jefferson was selected to draft the Declaration of Independence because
A. he volunteered. B. he was already recognized as a brilliant writer. C. the other members of the Continental Congress were all busy with other tasks. D. he believed the colonies' independence should be celebrated with fireworks each year. E. he was a renowned Virginia newspaperman.
Los planos que muestran el estilo exterior de un edificio son _____.
a. planos del sitio b. planos de planta c. planos de elevación d. Ninguno de los anteriores.
The power supply provided to a zone control panel is typically _____.
a. 24VAC b. 24VDC c. 120VAC d. 240VAC
According to the National Electrical Code®, when grounding coaxial cables associated with CCTV systems, as long as __________ no other ground is required.
A. The viewing monitor that the cable is attached to is grounded B. The outer conductive shield on the cable is grounded C. The camera that the coax is connected to is using a building ground D. The grounding means used for all other communications systems is at a different potential