A defective clutch release (throw out) bearing is usually heard when the clutch is ________.

A) Engaged in first gear or reverse
B) Depressed to take up any free play
C) Disengaged in gear
D) Engaged in neutral


B) Depressed to take up any free play

Trades & Technology

You might also like to view...

In orthographic projection, the exact form of the object is shown by various views of the object arranged in a particular order.

Answer the following statement true (T) or false (F)

Trades & Technology

Select an acceptable statement of the Clausius statement of the second law.

A) A heat pump cannot produce more heat than the compressor input. B) A heat pump cannot discharge heat without inputting work. C) A heat pump cannot discharge heat without receiving heat. D) A heat pump discharges heat whenever the compressor work is greater than the heat it receives.

Trades & Technology

Air expands in a cylinder from 827ºC to 87ºC while the pressure remains constant. Determine the entropy change assuming a) constant specific heats from Table B-6 and b) using Table F-1. The percent error in the part (a) calculation is nearest:

A) 2.9% B) 3.5% C) 3.8% D) 4.2%

Trades & Technology

When a vector drive holds the motor in a stationary position, the stator flux __________.

A. is turned on and off at a rapid rate of speed B. is held constant C. lines are alternated in opposite directions at a high rate of speed

Trades & Technology