To switch the SCR off, it is necessary to reduce the ____ voltage below the hold-on value, typically close to zero.

A. anode-to-cathode
B. positive input gate
C. momentary gate
D. negative input gate


Answer: A

Trades & Technology

You might also like to view...

What are the three primary benefits of using the zero tolerance at MMC method?

What will be an ideal response?

Trades & Technology

Satellites can be used to take conventional photographs of agricultural fields

Indicate whether the statement is true or false

Trades & Technology

Most communicating systems are wired with four wires. They are:

A) Two wires for 24 V power and two for communication. B) Communication lines 1, 2, 3, and 4. C) One wire for power, one for cooling, one for heating, and one for fan. D) Power lines 1, 2, 3, and 4.

Trades & Technology

The Sylvania Super Saver 75 W light uses 20 watts, produces 1280 lumens, and costs $4.49. As an alternative a generic 75 W incandescent light bulb costs $0.40, produces 1200 lumens, and has a service life of 750 hours. Compare the performance of each light by calculating the efficacy for each light and estimate how much it would cost to run each light for 4 hours per day for 300 days in a year. Assume electricity costs 9 cents per kWh.

What will be an ideal response?

Trades & Technology