Use the following engine dimensions to calculate the compression ratio
Bore: 4.100 in. Stroke: 3.500 in. Gasket thickness: 0.050 in.
Deck height: 0.025 in. Piston dish volume: 11.2 cc Combustion chamber volume: 65.0 cc
A) 9.4:1 B) 9.2:1 C) 9.1:1 D) 9.3:1
B
You might also like to view...
Compare and contrast the ideologies, priorities, and constituents of the New Right of the 1980s from the Old Right of the 1930s? In which policy areas were they similar and in which policy fields did they have different approaches? What were the most important things that New Right conservatives wanted to conserve?
What will be an ideal response?
Considering the comparison step in the control process, which of the following is an
inappropriate action following the evaluation of information?
a. Correct deviations as required. b. Maintain the status quo. c. Increase the control standards. d. Eliminate the control if things went as planned. e. Decrease the control standards.
A 220-V electric heater has two heating coils that can be switched such that either coil can be used independently or the two can be connected in series or parallel, for a total of four possible configurations. If the warmest setting corresponds to 2,000-W power dissipation and the coolest corresponds to 300 W, find the resistance of each coil.
What will be an ideal response?
In the above figure, the __________ of the amplifier output determines which direction the servo valve causes the linear actuator to move.
A. amplitude B. polarity