The selection of shielding gas is established by:
A) Filler wire selection B) Cost
C) Operator appeal D) All of the above
D
You might also like to view...
When following a cylinder head bolt torque sequence while torquing a single slab cylinder head, which bolts should be torqued last in the sequence?
A. those in the center B. those on the intake side C. those on the exhaust side D. those furthest from the center
En los sistemas de tuberías subterráneos para temperaturas moderadamente calientes, el espacio entre la tubería y la capa externa se llena con _____.
a. espuma de uretano b. lana mineral c. fibra de vidrio d. celulosa
The manufacturing cell will operate only if certain conditions are met. The condition for the cell to start is that one of two start buttons (X and Y) must be pressed and the guard (G) must be in position. The cell is designed to stop if the safety guard is disturbed, or if either of two stop buttons (S1 and S2) is pressed. The sensor monitoring the guard sends a "1” whenever the guard is in its right position. Otherwise the sensor transmits a "0". The start and stop buttons are activated by relay sensors that in turn send “l”'s when pressed. Design a logic circuit to monitor the cell.
What will be an ideal response?
What color should the flames be in a correctly adjusted gas burner?
A) Bright white inner cone with dark purple outer cone B) Bright blue inner cone with yellow tips C) Bright blue inner cone with darker outer cone D) Dark orange inner flames with yellow tips